Cabletron Systems Netlink FRX8000, User Manual

Page: 272 / 468

18-16 FRX8000 3. 0 User G uide, Rev 02
Figure 18-5 Call Accounting File Structure
Rolling the File Over
Press
[E]
at the Node Operations Menu (or
[B], [B], [E]
from the Main Menu). When
prompted, enter:
●
Your low-level operations password.
●
The ID of the node whose accounting file you want to roll over.
At the ICP/INM/NMP, the last block of the current file will be written, the file closed,
and a new version created. A printer message at that node will signal completion of
the rollover.
The closed file is named CAF.yymmddhhmm, where yymmddhhmm is the date and
time the file was closed.
If you perform a rollover twice within one minute, the first
backup file created will be written over by the second.
01 = P VC S etup
02 = S VC Call Request
S 22 = Remote s ubscriber cleared call
S 25 = Line down (failed)
34 = S ubscriber s ent illegal Call Request
35 = S ubscriber s ent illegal Call A ccept
S 36 = Local S VC cleared
37 = S ubscriber s ent illegal Clear Confirm
44 = Local s ubscriber iss ued Reset
S 46 = Local s ubscriber iss ued Restart Request
S 47 = Local s ubscriber s ent illegal Restart Confirm
59 = Remote s ubscriber iss ued Reset
67 = S ubscriber did not res pond to Reset
SP 79 = Line down per operator reques t or IP L
99 = P eriodic activity report
Remote LP 8 = special process
LP 8/Remote Port 2 = Test Services
LP 8/Remote Port 3 = Message S ervices
Reason Code 02 only
2 3 4 2 3 4 2 0-65 2 2
Local Local Local Remote Remote Remote Call Reverse
Thruput Window Packet Thruput Window Packet Length S etup Charge
Class Size Size Class Size Size of NUI N UI Priority 0= N,1=Y
2 2 2 2 2 2 1 2 3 1 2 15 4 3 1 2 15 4 To P ath
PVC Reason Local Local Local Local Remote Remote Remote Remote A or B
Y R MO D Y H RMN S C SVC Code N ode LP Port S ub ID LCN Node LP Port SU B ID LCN below
Number of D igits
0 = SVC
1 = PVC
0 = Autobaud
6 8 8 6 8 8
Pkts Sent Sgmts Sent Bytes Sent P kts Sent Sgmts S ent Bytes S ent
Local to Local to Local to Remote to Remote to Remote to
Remote Remote Remote Local Local Local
P ath A
Reason Code
01 or 02
Path B
Reas on Code
03 or higher
Notes
1. Subs criber ID is always 15 digits. U nused digits will be filled w ith blanks.
2. Under R eas on Code: S means SVC call was terminated.
P means PV C was removed.
3. For setup and trans fer priorities, negative numbers will convert to 9 through F.