Cabletron Systems Netlink FRX8000, User Manual

Page: 264 / 468

18-8 FRX8000 3. 0 User G uide, Rev 02
5. When prompted, enter the source node ID. (If you are transferring the file from
an NMP, this is the ID of the attached node.)
6. When prompted for a source file name, type
NMP/pia.o [Enter]
.
7. When prompted, enter the destination node ID.
8. When prompted for a destination file name, type
pia.o [Enter]
.
9. When notified that the transfer is complete, press
[Enter]
, then
[F]
, and repeat steps
3–6, transferring source file name
NMP/rc. once
to destination file name
rc.once
.
10. When the second transfer is complete, press
[Enter]
to return to the
Network Operations Menu.
Once the
All Software Update
has been performed for both the remote NMP and its
node, the following steps must be done at the remote NMP:
1. Press
[R]
at the
Main Menu
.
2. At the
[NETLINK]
prompt, type
stop [Enter]
.
3. At the next
[NETLINK]
prompt,
type rc.once [Enter]
. (Ignore the warnings that say:
can't access
......)
4. At the next
[NETLINK]
prompt, type
su [Enter].
5. When prompted, enter your root password.
6. At the
#
prompt, type:
cp pia.o /etc/conf/pack.d/pia/Driver.o [Enter]
.
7. At the next
#
prompt, type
cd /etc/conf [Enter]
.
8. At the next
#
prompt, type
/etc/conf/bin/idbuild [Enter]
.
9. When asked (after 5-10 minutes):
Do you want this kernel to boot by default?
,
type
y [Enter]
.
10. When asked:
Do you want the kernel environment rebuilt?
, type
y [Enter]
.
11. At the
#
prompt, type
shutdown -g0 [Enter]
. (
0
is “zero.”)
12. When asked:
Do you want to continue?
, type
y [Enter]
.
13. When prompted:
Press any key to Reboot
, press any key.
14. At the
UNIX
boot prompt, press
[Enter]
.
15. When prompted to type
Control-D
or enter your root password,
press
[Ctrl] [D]
.
16. At the login prompt, enter your login name and, if requested, login password.
17. At the
[NETLINK]
prompt, type
nmpini [Enter]
.