Cabletron Systems Netlink FRX8000, User Manual

Page: 356 / 468

21-34 FRX8000 3. 0 User G uide, Rev 02
246.
NMP run–time error at Node “n”
Severity: 3
Meaning: The NMP support task responded to a watchdog timer request, but
could not forward the message to the watchdog task, so node “n” or
its NMP (if a node with attached NMP) is down.
Action: Restart the NMP/node.
247.
NMP I/O failure at Node “n”
Severity: 3
Meaning: The NMP support task could not respond to a watchdog timer
request, so it forwarded the message to the watchdog task. However,
the watchdog task did not respond, probably because it could not be
loaded from the disk, and node “n” (or its NMP (if a node with
attached NMP) is down.
Action: Restart the node/NMP.
248.
NMP at Node “n” is reachable
Severity: 3
Meaning: Node “
n
” has reestablished communication with its NMP.
249.
NMP at Node “n” is not reachabl
e
Severity: 2
Meaning: The node cannot communicate with its attached NMP.
Action: Check the NMP for proper operation, and check the hardware for
proper connections.
250.
LP “n” Port “n” – Excessively noisy line
Severity: 3
Meaning: Self-explanatory.
Action: Check the communications line and cables, replacing cables if nec-
essary.
255.
Database recovery initiated for “n” files from Node “n”
Severity: 4
Meaning: You have requested initiation of Database Recovery . The node's
database logging task is reporting that Database Recovery has been
initiated, and how many files it expects to copy.
256.
Database recovery requesting (filename) to be replaced
Severity: 4
Meaning: This node is requesting that the file be replaced as part of Database
Recovery .