Cabletron Systems Netlink FRX8000, User Manual

Page: 466 / 468

Idx-6 FRX8000 3. 0 User G uide, Rev 02
Permit 14-17
Physical Interface 7-14 , 8-5 , 9-5 , 10-6 , 11-4 , 12-12
Ping 21-3
Poll Interval Timer 11-6
Poll Verification Timer 8-7
Port Diagnostics Enabled 14-8
Port signals, displaying 18-15
Port statistics 19-5
Port Statistics Display Parameters 19-5
Port Status Display Parameters 18-3 , 18-4 , 18-7 , 18-8
Port status, displaying 18-2
Port, configuring
async 12-10
BSC 11-3
frame relay 8-4
SNA 10-4
trunk 7-3
X.25 9-2
Port, disabling 17-1
Port, enabling 17-1
Preferential CUG Flag 7-25 , 9-10 , 9-29
Preferential CUG Index 7-25 , 9-10 , 9-29
Primary Packet Size 9-20 , 12-22 , 13-11
Primary Subscriber Name 9-20 , 12-21 , 13-11
Primary Window Size 9-20 , 12-22 , 13-11
Primary/Secondary DLCI 8-9
Primary/Secondary Logical Channel 9-19 , 12-21
Primary/Secondary Name 8-9
Priority 8-3 , 10-18 , 10-24 , 10-28
Priority for Group “n” 4-7
Processes, displaying F-2
Profile Name 12-9 , 12-13
Profile, async PAD 12-2
changing on line 12-8
Prompts 2-2
Propagation Delay 7-15
Protocol 1–5 6-5
PROTOCOL.INI 6-19
PU Name 10-15
PU, SDLC, configuring 10-12
PVC Connection 13-7
PVC Report 3-13
PVC, configuring
async 12-20
frame relay 8-8
IP over X.25 13-10
trunk 7-20
X.25 to X.25 9-18
PVC, creating/deleting on line 8-9 , 9-20 , 12-22 , 13-12
PVC? 12-14
R
Rcv Ack Timer - T2 10-17 , 10-23
Rcv Clock (TT) from DTE 7-15 , 8-6 , 9-7 , 10-8 , 11-6
Rebooting
FRX8000 ICP G-3
FRX8000 INM G-6
FRX8000 Switch G-2
N7400 G-7
N7500 G-10
Receive Break Signal 12-6
Redirect on Busy 7-19 , 9-17 , 10-11 , 11-9 , 12-18
Redirect on Out of Order 7-19 , 9-17 , 10-11 , 11-9 , 12-18
Re-IPL, remote node 17-4
Release number, displaying F-2
Remote control 17-22
Remote Device Type 10-25
Remote software update 17-6
Remote Subscriber ID 10-16 , 10-25 , 11-11
Reply Timer - T1 10-17 , 10-22
Reset causes D-2
async A-6
Reset Timer 9-9
Restart causes D-2
Restart Timer 9-9
Retransmission Period 11-5
Retry Count 12-15
Retry Interval 12-15
Reverse Charge Acceptance 7-25 , 9-8 , 9-29
RIP Age Timer 14-8
RIP Enabled 14-8
RIP Filter Parameters 14-13
RIP Flash Updates 13-6
RIP Full Updates 13-6
RIP Maximum Size 14-9
RIP Router Filter Parameters 14-16
RIP Table Parameters 18-9
RIP table, displaying 18-9
RLP 1-6
FRX8000 6-1
N7000 6-6
RLP Available Memory 6-4
RLP/Port 10-27
Route Destination 13-9
Route Number 14-19
Route Type 13-9
Router 13-9 , 14-20
Router Address Value 14-16
Routing Algorithm 7-19 , 9-17 , 10-10 , 11-9 , 12-18
Routing Metric Count 13-6
Routing Subscriber ID 10-24
Routing updates, analyzing F-2
RTS-CTS H/W Flow Control 12-15
rupana F-2