Cabletron Systems Netlink FRX8000, User Manual

Page: 77 / 468

Configuring LPs and LAN Cards 6-17
Channel Map Parameters
1 Type 1 is not supported in the current FRX8000 release.
Group Name
is a description for the channel map.
Base Rate
is the line speed of individual DS0 channels configured in this channel map.
0
= 56K
1
= 64K
2
= 64K Alternating
Start DS0 Channel Number
is the first channel number in a group of DS0 channels.
How many DSOs
is the number of DS0s in a group of contiguous DS0s.
Destination Type
is the destination LP type of a DS0 channel:
0
= T1/E1 LP,
2
= Expansion LP
LP Number, Port Number
are the destination LP and port of a T1/E1 line.
Expansion LP Number
is an Expansion LP destination for a T1/E1 line.
Line Conditioning
is the pattern to be put on the data path in the event a Carrier Failure alarm occurs
(when line synchronization is lost).
1
= TC(ijkl, mnop)IDEL
2
= TC(ijkl,mnop)IWpq
3
= TRSPZ
4
= TRSP_MUX
5
= TRSP, TRB
6
= TRSP, IWpq
Table 6-6 T1/E1 Channel Map Parameters
Parameter Valid Values Default Value
Group Name 20 characters none
Base Rate 0–2 1
Start DS0 Channel Number 1–24 (T1) or 1–30 ( E1 ) 1
How m any DSOs 1–24 ( T1
) or 1–30 (
E1
)
1
Destination Type
0 or 2
1
0
LP Number 0–7 0
Data Card Number
n.a. (Data cards are not supported)
Expansion LP Number 0–9 0
Por t Number 0–3 0
Li ne Conditi oni ng 1–6 4