Cabletron Systems Netlink FRX8000, User Manual

Page: 184 / 468

12-8 FRX8000 3. 0 User G uide, Rev 02
Configuring Subscriber IDs
This operation configures the called and calling addresses that will be used in X.25
call setup if SNA is being transported over the frame relay link via a logical X.25 port.
To complete the connection, the software must recognize where the call is coming
from (calling address) and where it is going (called address).
To configure an SVC Subscriber record, press
[A]
, then
[C]
at the Subscriber Config-
uration Menu (or
[A], [F], [A], [C]
from the Main Menu). When prompted, enter a
Sub-
scriber ID
, up to 15 digits (as described on page 9-15 ). (The default is an asterisk, a
universal wildcard.) If this is an existing record, a screen similar to Figure 12-3 will
be displayed. If this is a new record, enter the remaining requested information, noting
the values in
Table 12-2 .
Figure 12-3 SVC Subscriber Record
[A],[F],[A],[C]
from Main Menu
The parameters displayed by pressing
[1]
or
[2]
are listed in Table 12-2 .
When Changes Take Effect
When you add a new Subscriber record, the change will be written to the database as
soon as you enter the final parameter value. When you modify a parameter in an
existing record, the change will be written to the database immediately.
The change will become effective to the subscriber as soon as the next call is placed.
(The change will not affect a call in progress.)
Sub scriber Maintenance
* Su bscrib er ID 10000100001
A Su bscrib er Name s sub 1
B Dialup Su bscrib er N
C Rou tin g A lgorithm 0 Rou nd Robin
D Sys tematic R ed irection Y
E Redirect on Bu sy N
F Redirect on Out of Order N
G Band w. Allocation Grou p 1
1 Rou tin g Paths
2 Redirection Add ress es
Select: