Cabletron Systems Netlink FRX8000, User Manual

Page: 342 / 468

21-20 FRX8000 3. 0 User G uide, Rev 02
Action: Check the Subscriber and Port records.
124.
LP “n” Port “n,” PAD received invalid configuration for extended remote
subscriber “n”
Severity: 3
Meaning: Normally, this error means that no remote HPAD subscriber has
been configured for this port. If one has been configured, then there
is some problem with the record.
Action: Check the Subscriber and Port records.
125.
LP “n” Port “n” Logical Trunk “n” Enabled
Severity: 4
Meaning: Self-explanatory.
126.
LP “n” Port “n” Logical Trunk “n” Disabled
Severity: 4
Meaning: The logical trunk was intentionally disabled.
131.
LP “n” Port “n” Invalid message type “n” received
Severity: 3
Meaning: The LP operating system task received an invalid message type from
the PPM.
Action: Verify all entries. If you get this message again, contact Cabletron
Systems Technical Support . (See page 21-7.)
133.
ICP at Node “n” is reachable
Severity: 4
Meaning: The Integrated Call Processing (ICP) function at the specified node
is accessible.
134.
ICP at Node “n” is not reachable
Severity: 2
Meaning: The Integrated Call Processing (ICP) function at the specified node
is inaccessible.
Action: None.
135.
CGI error “n”, called from “n”:“n”
Severity: 1
Meaning: An internal error has occurred in the graphics-mode software.
Action: Contact Cabletron Systems Technical Support . (See page 21-7.)
136.
Bad packets on LP “n” Port “n”, possible configuration mismatch
Severity: 3
Meaning: Self-explanatory.