Cabletron Systems Netlink FRX8000, User Manual

Page: 344 / 468

21-22 FRX8000 3. 0 User G uide, Rev 02
9110
– spp_ac26 has been called and the message facility is IF (I–
frame), an RR is to be sent, and the Poll/Final bit is set. (This is a
programmer error).
aa01
– QLLC received a message from the SDLC (spql_lnkmsg())
with a facility to initialize the Secondary Link Level (LPSVCU),
and the maximum number of remote controllers allowed has been
exceeded (MAXRLS).
aa02
– QLLC received a message from the SDLC (spql_lnkmsg())
with a facility to terminate the QLLC (LPSVCD), and the maximum
number of remote controllers allowed has been exceeded
(MAXRLS).
aa03
– QLLC received a message from the SDLC (spql_lnkmsg())
with a facility to transmit a BTU to the Primary and the maximum
number of remote controllers allowed has been exceeded
(MAXRLS).
aa04
– QLLC received a message from the SDLC (spql_lnkmsg())
with an unknown facility.
aa05
– QLLC received a message from the packet layer
(spql_pktmsg()), and the maximum number of remote controllers
allowed has been exceeded (MAXRLS).
aa06
– QLLC received a message from the packet layer
(spql_pktmsg()) with a facility of Receive X.25 U–Packet and PAD
type of NPAD with a length less than 6.
aa07
– QLLC received a message from the packet layer
(spql_pktmsg()) with a data [4] of Request QDC and a data [3] that
is not 0xff.
aa08
– QLLC received a message from the packet layer
(spql_pktmsg()) with a data [4] of unknown value.
aa09
– QLLC received a message from the packet layer
(spql_pktmsg()), the protocol parameter is set (QLLC Secondary)
and with a data [4] of unknown value.
aa0a
– QLLC received a message from the packet layer
(spql_pktmsg()), the QLLC is Primary and with a data [4] of
unknown value.
aa0b
– QLLC received a message from the packet layer
(spql_pktmsg()), with an unknown facility.
aa10
– QLLC received a message from the SDLC with a facility of
Received FRMR Indication by Primary (LPQDAT) with a VC ID
greater than or equal to to the maximum number of allowed remote
controllers.
aa11
– QLLC received a message from the SDLC with a facility of
Received SNRM for FRMR Reset by Secondary (LPRSET) with a
VC ID greater than or equal to to the maximum number of allowed
remote controllers.
aa13
– QLLC received a message from the SDLC with a facility of
UA Signal form Link to QLLC (LPQUA) with a VC ID greater than
or equal to to the maximum number of allowed remote controllers.