Cabletron Systems Netlink FRX8000, User Manual

Page: 220 / 468

14-8 FRX8000 3. 0 User G uide, Rev 02
Configuring a Static IP Route
Routing of IP traffic is handled dynamically by such protocols as RIP, as well as via
static routes configured in the FRX8000. To configure a route, press
[D]
, then
[C]
from
the Connections and Routing Paths Selection Menu (or
[A], [F], [D], [C]
from the Main
Menu). When prompted, enter:
●
Node number
:
1–250
.
●
Interface number
:
0–999
, which is simply an identifier.
●
Any other requested information, noting Table 14-2 .
Figure 14-2 IP Route Record
[A],[F],[D],[C]
from Main Menu
When Changes Take Effect
When you add a new IP Route record, the change will be written to the database as
soon as you enter the final parameter value. When you modify a parameter in an
existing record, the change will be written to the database instantly.
To make the change effective, press [F7] while the record is displayed. (If this is not
done, the change will become effective the next time the node containing the interface
undergoes re-IPL.)
I P Route Maintenance
* Node 10
* Interface N umber 123
A Router 255.255.255.255
B Metric C ount 1
C Route Typ e 0 N etw ork
D Route D es tin ation 0.0.0.0
E Destination Mask 255.255.255.255
S elect: