Cabletron Systems Netlink FRX8000, User Manual

Page: 239 / 468

Configuring IPX 15-15
Packet Filter Parameters
Filter Name
helps the user identify the filter. The name is not used by the software.
Packet Type Value
00
= unknown packet type
01
= RIP packet
04
= SAP packet
05
= SPX (Sequenced Packet Exchange) packet
11
= NCP (NetWare Core Protocol) packet
14
= Propagated packet, used for NetBIOS (an IBM protocol that performs
transport- and session-layer tasks)
Destination Network Value
is the network number of the destination node's network.
Destination Node Value
is the physical address of the destination node. The node's internetwork address is the
network number followed by the node address followed by the socket number.
Destination Socket Value
is the socket address of the packet's destination process.
Source Network Value
is the network number of the source node's network.
Table 15-7 IPX Packet Filter Parameters
Parameter Valid Values Default Value
Fi lter Name 1–32 characters none
Packet Type Value 0–ff (1 byte) ff
Packet Type Mask 0–ff (1 byte) ff
Destination Network Value 0–ffffffff (4 bytes) ffffffff
Destination Network Mask 0–ffffffff (4 bytes) ffffffff
Destination Node Value 0–ffffffffffff (6 bytes) ffffffffffff
Destination Node Mask 0–ffffffffffff (6 bytes) ffffffffffff
Destination Socket Value 0–ffff (2 bytes) ffff
Destination Socket Mask 0–ffff (2 bytes) ffff
Source Network Value 0–ffffffff (4 bytes) ffffffff
Source Network Mask 0–ffffffff (4 bytes) ffffffff
Source Node Value 0–ffffffffffff (6 bytes) ffffffffffff
Source Node Mask 0–ffffffffffff (6 bytes) ffffffffffff
Source Socket Value 0–ffff (2 bytes) 0451
Source Socket Mask 0–ffff (2 bytes) 0451