Cabletron Systems Netlink FRX8000, User Manual

Page: 367 / 468

Alarms 21-45
Action: Check the configuration records for the port, and correct the DLCI.
372.
Node “n” LP “n” Port “n” DLCI “n” PVC does not exist
Severity: 3
Meaning: Self-explanatory.
Action: Create a PVC Connection record.
373.
FR LP “n” Port “n” DLCI “n” frame discarded–congestion
Severity: 3
Meaning: Self-explanatory.
Action: The frame must be re-sent.
374.
Node “n” LP “n” Port “n” DLCI “n” frame relay logical trunk configured on a
DCE port
Severity: 3
Meaning: Self-explanatory; frame relay trunks can only exist on DTE ports.
Action: Configure the trunk on a DTE port.
375.
Node “n” LP “n” Port “n” DLCI “n” frame relay PVC deleted
Severity: 4
Meaning: Self-explanatory.
376.
Node “n” LP “n” Port “n” DLCI “n” Frame Relay PVC connected to Node “n”
LP “n” Port “n” DLCI “n”
Severity: 3
Meaning: Self-explanatory.
377.
LP “n” Interface board “n” is installed but not configured
Severity: 3
Meaning: The software has discovered the presence of an RLP Line Interface
Card that has no records in the Port file.
Action: Create records for the ports on the interface card.
378.
LP“n” Interface board “n” is Configured, but not Installed
Severity: 1
Meaning: The software has discovered Port records for an RLP Line Interface
Card that is not present in the node.
Action: Install the interface card, or delete the records.
379.
LP “n's” Interface board “n” configuration mismatch – installed type “n”
Severity: 2
Meaning: The Physical Interface specified in the Port record(s) for RLP Line
Interface Interface card do not match the hardware.