Cabletron Systems Netlink FRX8000, User Manual

Page: 258 / 468

18-2 FRX8000 3. 0 User G uide, Rev 02
Select item
A
or
C
from the On-Line Port Operations Menu. When prompted, enter the
LP and port numbers.
A disabled port's state is reported as
Link_Disabled
on status displays, and
the port can neither send nor receive packets.
V.25bis Modem Operations
These operations allow you to view V.25 port status for a node, as well as send infor-
mation (e.g., new modem INI string) to a modem or disconnect a call.
A disabled port's state is reported as
Link_Disabled
on status displays, and
the port can neither send nor receive packets.
Press
[K]
at the On-Line Port Operations Menu. When prompted, enter a node number.
Figure 18-2 V.25bis Dial Port Status Screen
[B],[A],[K] from Main Menu
The above screen will display up to 16 ports. If the node has more than 16 V.25bis
ports, Page 1 will be displayed in the upper right corner. Pressing
[F2]
will display
page 2. (At the page 2 display, pressing
[F2]
will display page 1.)
The various modem status messages are self-explanatory.
To perform modem operations at a port, press the letter (see Figure 18-2) that corre-
sponds to the port. When prompted, enter your low-level operations password. A
screen similar to Figure 18-3 will be displayed.
V25 Bis Dial Port for Nod e 10
A LP 0 Port 0 D ial Pending
B LP 0 Port 3 Modem Pres en t, Idle
C LP 1 Port 2 Modem in In teractive Mode
D LP 1 Port 3 Trun k Establis hed
E LP 1 Port 5 C all in Progress 1122000
Select Port: