Cabletron Systems Netlink FRX8000, User Manual, Page: 256 / 468

17-4 FRX8000 3. 0 User G uide, Rev 02
C IP Statistics
A Display IP Statistics – displays the supported statistics, including
current values and cumulative values since maximum values were
last cleared.
B Display ICMP Statistics – displays the supported statistics, including
current values and cumulative values since maximum values were
last cleared.
C Display IP Interface Statistics – displays the supported statistics,
including current values and cumulative values since maximum
values were last cleared.
D Display IPX Statistics – displays the supported statistics, including
current values and cumulative values since maximum values were
last cleared.
E Clear Maximum Values – resets the maximum values on an LP, Port, or
frame relay statistics display to zero
F Cumulative Statistics
A Cumulative Statistics Maintenance
– allows collecting values for a
specified port over a specified time interval.
B Cumulative Statistics Report
– displays, prints, or saves cumulative
statistics values.
G Change Statistics Thresholds On-Line
– allows temporarily changing
the threshold values configured in the database.
H Load Configured Statistics Thresholds
– overwrites any on-line changes that
were made and restores the database values.
I LAN Card Statistics
– displays statistics for a specified LAN card.
G Reports
– Lists of configured values for all parameters found in database
records for one or all nodes in the network
A Configuration Report
– Contents of the Node, Line Processor, and Port files.
Chapter 3.
B SVC Subscriber Report
– Contents of the Subscriber file. Chapter 3.
C PVC Report
– Contents of the PVC Connection file. Chapter 3.
D IP Report
– IP Interfazce records. Chapter 14.
E Node LAN Card Configuration Report
– Contents of PROTOCOL.INI,
which contains information identifying LAN cards. Chapter 6.
F Node Initialization Report
– Contents of BOOTRPT.TXT, which contains
data recorded during IPL of a node. Appendix G.
G Node Previous Initialization Report
– Contents of BOOTBAK.TXT, which
contains data recorded during the previous IPL of a node. Appendix G.
H Group Send Report
– lists the subscribers that belong to each Group Send
group, as well as the groups to which each subscriber belongs. Chapter 9.
H Graphics-Level Status Display
– Displays a “map” of the network (created in
Network Representation operations, described in Chapter 4), and
shows operational status at network, node, and port levels. Chapter 17.