Cabletron Systems Netlink FRX8000, User Manual, Page: 116 / 468

8-10 FRX8000 3. 0 User G uide, Rev 02
If a “create” fails, you will see:
Can't use same channel
or
Create rejected
, reason
“
n
,” where:
◆
If “
n
” =
1
or
11
, the request from the local
(1
) or remote (
11
) end was bad.
Either the DLCI requested was invalid or the LP/port was not operational.
◆
If “
n
” =
2
or
12,
the PVC already exists at the local (
2
) or remote (
12
) end.
If a “delete” fails, you will see:
Remove rejected
, reason “
n
,” where:
◆
If “
n
” =
3
, the local end of PVC does not exist.
◆
If “
n
” =
4
, the remote node number is incorrect.
◆
If “
n
” =
5
, the remote LP/port is incorrect.
When finished with these operations, press any key to return to the
Subscriber ID
:
prompt, then press
[F3]
to return to the Operations Menu.
Configuring Frame Relay DLCIs
Frame Relay DLCI records specify the rates at which data will be transmitted on frame
relay DLCIs under normal and bursty conditions.
To configure a DLCI, press
[B]
, then
[C]
from the Ports Selection Menu (or
[A], [D], [B,
[C]
from the Main Menu). When prompted, enter:
●
Node ID
(of the node containing the frame relay port):
1–250.
(Default is the
“local” node.)
●
LP ID
(of the LP containing the port):
0–7
. (Default is
0
.)
●
Port number: 0–7
for a physical port on an RLP,
8–63
for a logical port.
●
DLCI: 16–991
. (Default is
16
.)
●
Any other requested information, noting the values in Table 8-3. (Press
[Enter]
at a prompt to specify the default value.)