Cabletron Systems Netlink FRX8000, User Manual

Page: 63 / 468

Configuring LPs and LAN Cards 6-3
To configure RLP parameters, press
[C]
,
[C]
from the Configuration Selection Menu
(or
[A], [C], [C]
from the Main Menu). When prompted, enter:
●
Node ID
(the node containing the LP):
1–250.
(Default is the “local” node).
●
LP ID : 0–7
(default is
0
). This is determined by switches 1–3 on the RLP’s
dipswitch.)
●
Any other requested information, noting the values in Table 5-1 . (Press
[Enter]
at a prompt to specify the default.)
Figure 6-2 FRX8000 RLP Configuration Menu
[A],[C], [C] from Main Menu
E1
options
3
and
4
are displayed only if
LIC2
is
E1
. If
LIC1
is
E1
, similar
options will be displayed as menu items
1
and
2
.
When Changes Take Effect
When you add a new LP record, the change will be written to the database as soon as
you enter the final parameter value. When you modify an existing record, the change
will be written to the database immediately.
The change will become effective at the RLP in one of the following ways:
●
A change to an RLP in an ICP or INM is immediately effective when the
database record is changed.
●
A change to an RLP in an FRX8000 Switch can be implemented by performing
a
Configuration Update
(
[B], [B], [D], [A]
from the Main Menu) to the node con-
taining the LP.
Lin e Proces sor Maintenance
* Node I D 10
* LP ID 1
LP Type 7 RLP
B Lin e Interface C ard 1: 1 RS --232
C Lin e Interface C ard 2: 5 E1
D RLP Memory in Mgb 4
E Protocol #1: 1 X.25
F Protocol #2: 3 FRL
G Protocol #3: 4 S DLC
H Protocol #4: 7 IP
I Protocol #5: 11 Trunk
3 E1 LIC 2 Parameters
4 E1 LIC 2 Us e Bits:
Select: