Cabletron Systems Netlink FRX8000, User Manual, Page: 67 / 468

Configuring LPs and LAN Cards 6-7
When Changes Take Effect
When you add a new LP record, the change will be written to the database as soon as
you enter the final parameter value. When you modify an existing record, the change
will be written to the database immediately.
The change will become effective at the LP in one of the following ways:
●
A change to an RLP in an ICP, INM, or NMP node is immediately effective
when the database record is changed.
●
A change to LP 0–3 in a DPPM node, can be implemented by performing a
Configuration Update ( [B], [B], [D], [A] from the Main Menu) to the node con-
taining the LP.
Be sure to perform the update to a DPPM node before the node
undergoes a re-IPL.
●
A change to LP 4–7 in a DPPM node will take effect at the next IPL of the node
containing the LP.
N7000 RLP Parameters
LP Type
Although pressing [?] for help displays a range of 1–6 , these are the supported types:
3 = AST Card 4 = T1/E1 6 = RLP-7000 Node
Line Interface Card 1
contains physical ports 0–3 for the RLP:
0 = not installed
1 = RS-232 (supports RS-232C/V.28 through I/O box and cable)
2 = RS-422 (supports RS-449/V.36, RS-530, or X.21 through I/O box and cable)
3 = V.35
Line Interface Card 2
contains physical ports 4–7 of the LP. The choices are the same as for Line Interface
Card 1.
Table 6-2 N7000 RLP Parameters
Parameter Valid Values Default Value
LP Type 6 6
Li ne Interface Card 1, 2 0–3
1 ( RS-232 )