Cabletron Systems Netlink FRX8000, User Manual

Page: 217 / 468

Configuring IP 14-5
IP Interface Parameters
1
The address specified here must also be configured in a Subscriber record (described on
page 9-14). In that record,
1st Routing Path
must be configured as the node containing
the interface, the RLP configured for IP, and port 64. (All other parameters can remain
at the default values.)
2
The address specified here must also be configured in a Subscriber record (described on
page 9-14). In that record, 1st Routing Path must be configured as the node, RLP, and
X.25 port that will be used for the physical interface. (That RLP does not need to be the
one with IP installed.)
3
specifying 0 means that the DLCI is not assigned to a bandwidth allocation group.
Specify
0
for Bandwidth Allocation Group only if
0
is specified
for all connections on the same source DLCI; otherwise, allo-
cation will be unpredictable between assigned and unassigned
traffic.
Maximum Transmission Unit
is the maximum size (in bytes) of the data field that can be used to encapsulate an IP
datagram for transmission over the interface. Any IP datagrams larger than the
Maximum Transmission Unit (MTU) will be fragmented, resulting in additional pro-
cessing on any intermediate routers or gateways, as well as the destination host. If the
Table 14-1 IP Interface Parameters
Parameter Valid Values Default Value
Maximum Transmission Unit
1–576 (network interface)
1–1500
(Ethernet interface)
1–4096 (other interfaces)
576
1500
4096
Network Mask
valid IP address
255. 0.0.0
Routing Metric Count 0–255 0
ICMP Redirects Y/ N N
RI P Flash Updates (sec) 0–300 60
RI P Full Updates
(sec)
0–300 120
Interface Type 0–5 0 (X.25)
Source IP Address valid IP address 0. 0.0.0
Destination IP Address
valid IP address
0. 0.0.0
Broadcast IP Address valid IP address 0. 0.0.0
Source Subscriber
valid subscriber address
1
none
Destination Subscri ber
valid subscriber address 2
none
SVC Retry Timer (sec) 5–60 20
SVC Idl e Timer
(min)
0–5 1
Max VCs to Establish 1–8 1
PVC Connection Y/ N N
Source Card 0–7 0
Source Port 0–63 0
Source DLCI 16–991 16
Bandw. Al loc. Group
0–16
(if FR interface) 3
1–3 (if network interface)
1