Cabletron Systems Netlink FRX8000, User Manual

Page: 83 / 468

Configuring Inter-Nodal Trunks 7-3
Configuring Trunk Port Records
To configure an N74/7500 port as a logical trunk, go to “ Configuring N74/7500 PDN
Ports” on page 7-11. To configure any other trunk type, press
[A]
, then
[C]
from the
Ports Selection Menu (or
[A], [D], [A], [C]
from the Main Menu). When prompted,
enter:
●
Node ID
(of the node containing the port):
1–250
. (Default is the “local” node.)
●
LP ID
(of the LP containing the port):
0–7
. (Default is
0
.)
●
Port
:
0–7
for a physical port on an RLP,
0–3
for a port on an AST LP (N74/7500
only),
8–63
for a logical port. (If configuring an FRX8000 logical port, enter the
associated physical X.25 or frame relay port number when asked.)
●
Any other requested information, noting the values in Table 7-1. (Press
[Enter]
at a prompt to specify the default value.)
The display depends on whether you are configuring a trunk on a physical port with a
V.25bis modem connected (Figure 7-2), a physical port with no V.25bis modem
(
Figure 7-3 ), or a logical port ( Figure 7-4 ).
Figure 7-2 Physical Trunk Port Record for V.25bis Port
[A],[D],[A],[C] from Main Menu
Port Main ten ance
*
Node I D 10 n ode10
* LP ID 0 R LP
* Port 1
A Port Typ e 3 Trun k
B Ph ysical I nterface 4 V .25Bis_D ial
C Blocked Port Flag N
D Lin e Speed Code 10 9600 bp s
F Ou tstand in g Frames 2
G N2 Maximum R etrans mis sions 5
H T1 Retransmiss . Period -ms 2000
I T2 Ackn owled g. Delay-ms 1000
J T3 Link As surance Period-s 10
K Propagation Delay-ms 0
L Logical DC E Y
M Generate Clock Y
O Lin e Setup Retries 5
P Remote Telephon e Numb er 8005551212
Q Mod em INI String Name
Select: