Cabletron Systems Netlink FRX8000, User Manual

Page: 163 / 468

Configuring SNA 11-15
SNA PU Parameters
Table 11-3 lists all parameters for all HPAD/TPAD types, and explanations of some
parameters follow the table. Note that some parameters may or may not be displayed,
depending on the HPAD/TPAD types.
1
If the PU will be used for SDLC-LLC2 conversion (at the local node, or at a remote node
via a logical or physical X.25 port), this must be
Y .
2
In multiples of 4.
3
Must be less than the value for T1 to ensure that the remote link station will receive the
delayed acknowledgment before
T1
expires.
PU Name
identifies the PU to a host device.
Local Subscriber ID
is the subscriber address of the local end of an SNA connection. (A Subscriber record
must also be configured for this ID.)
Table 11-3 SNA HPAD PU Parameters
Parameter Valid Values Default Value
PU Name
up to 10 characters none
Local Subscriber ID
0–15 digits none
Remote Subscriber ID
0–15 digits none
Maximum Bytes per Frame 29–4109 269
SDLC Station Address
0–255 (00–ff hex )
0
Autocal l Y/N N
Autocal l Timer
(seconds)
15–255 60
Maximum Retr y Autocall 0–255
0 (indefinite retries)
L2 DatMode
n/a (not currently supported)
LLC2 Conversion (TPAD only) Y/N
1
N
LLC2 Parameters (TPAD only)
Local SAP Address 4–fe (hex) 2 04
Local MAC Address 0–fffffffffffe 400000000001
IDBLK 0–fff 000
IDNUM 0–fffff 00000
Reply Tim er - T1 (100 msec) 0–250 10
Rcv Ack Timer - T2 (msec) 0–5000
3
100
Inactivity Ti mer - Ti
(sec)
0–50 30
LPDUs before Ack - N3 0–127 3
Outstanding LPDUs - Tw 0–127 7
LPDUs if T1 Expir es - N2 0–255 8
Priority 0–9 0
Bandw idth All oc Group 0–16 0