Cabletron Systems Netlink FRX8000, User Manual

Page: 383 / 468

Alarms 21-61
522.
BSCI:Invalid protocol operations
Severity: 3
Meaning: An invalid operation has occurred, and has disabled the port.
Action: Take the same action as for message 500.
523.
BSCI:Invalid CUA, DUA operations
Severity: 3
Meaning: An invalid operation has occurred, and has disabled the port.
Action: Take the same action as for message 500.
524.
Invalid Line Speed LP “n” Port “n”
Severity: 3
Meaning: Self-explanatory.
Action: Correct the line speed in the Port record.
530.
I-FRM Blocked-Remote Busy Timeout
Severity: 2
Meaning: An RNR (Receive Not Ready) condition on the port has been
cleared by expiration of the Remote Busy Timer, which caused the
port to be reset.
Action: Check the user device for a problem that caused the RNR.
531.
I-FRM Blocked-No Acks from Remote
Severity: 2
Meaning: The remote user device is not accepting transmission from the local
device, and the local port has been reset.
Action: Check the remote device for a problem.
532.
Enter Service Affecting Condition
Severity: 2
Meaning: The DTE and DCE exchange messages regularly so that each knows
the other is running and ready. If one end does not respond, this
alarm message is sent and the link goes down.
Action: Check the equipment to see what caused the failure to respond.
533.
Exit Service Affecting Condition
Severity: 2
Meaning: The situation that caused alarm 362 had ended.
Action: None.
534.
DLCI “n” Frm Relay PVC Disconnected
Severity: 4