Cabletron Systems Netlink FRX8000, User Manual

Page: 230 / 468

15-6 FRX8000 3. 0 User G uide, Rev 02
1 A value of 0 disables aging.
2 If 0 is specified, the hard-coded MAC address of the LAN card will be used. If there are
no LAN cards installed, a value other than
0
must be specified.
3 Specifying
0
means that the DLCI is not assigned to a bandwidth allocation group.
Set
Bandw. Alloc. Group
to
0
only if
0
is specified for all connec-
tions on the same DLCI; otherwise, allocation will be unpre-
dictable between assigned and unassigned traffic.
Table 15-3 IPX Frame Relay Interface Parameters
Parameter Valid Values Default Value
Blocked Port Flag Y/N N
Interface Type 0–5 1
(Ethernet)
Frame Type 0 0 (TYPE_II)
Maximum Transmi ssi on Uni t 31–4096 4096
Port Diagnosti cs Enabled Y/N Y
NetBIOS Enabled Y/N N
NetBIOS Hops 0–255 8
RIP Enabled Y/N Y
SAP Enabl ed Y/N Y
Periodic RI P Enabled Y/N Y
Periodic RI P Timer
(seconds)
1–65535 60
Periodic SAP Enabled Y/N Y
Periodic SAP Tim er (seconds) 1–65535 60
RIP Age Timer (seconds) 0–65535
1
180
RIP Maximum Size
(bytes)
54–446 446
SAP Age Timer
(seconds)
0–65535
1
180
Tr ansport Time (55ms ticks)
0–255 1
Serialization Enabled Y/N Y
Watchdog Spoofing Enabled Y/N N
IPX Network Address 1–fffffffe 00000001
IPX Node Address 0–fffffffffffe
2
000000000001
IPXWAN Enabl ed Y/N N
Source Card 0–7 0
Source Port 0–63 0
Source DLCI 16–991 16
Bandw. All oc. G roup 0–16 3 1