Cabletron Systems Netlink FRX8000, User Manual

Page: 333 / 468

Alarms 21-11
33. LP image file not loading
Severity: 1
Meaning: While the INM/NMP software was sending the Load Image file
(executable program) to the LP, there was a problem and the load did
not complete.
Action: Verify that the LP file is correct, then re-IPL the node.
34.
Cumulative Statistics file rollover request sent to Node “n”
Severity: 4
Meaning: The Cumulative Statistics file (CSTAT.DAT) on node “n” reached its
maximum size, is being closed, and a new one is being created.
35.
New Cumulative Statistics file has been created for Node “n”
Severity: 4
Meaning: LOGTSK has created a new Cumulative Statistics file
(CSTAT.DAT).
36.
Cannot Create Cumulative Statistics file for Node “n”
Severity: 2
Meaning: LOGTSK was unable to create a Cumulative Statistics file
(CSTAT.DAT).
Action: The disk is probably full. Contact Cabletron Systems Technical
Support . (See page 21-7.)
37.
Unknown message type “n” from node
Severity: 4
Meaning: Message number “n” has been received, but there is some dis-
crepancy in its meaning or validity (e.g., a message confirming
establishment of a PVC to a non-existent port).
Action: Verify that all software you are running is compatible.
43.
DEAPLY received from Node “n” but backouts are not enabled
Severity: 3
Meaning: This node has just rejoined a partitioned network and a multiple
master situation has been resolved.
Action: Perform “
Enable Backouts
” (described on page 18-20 ) so the node
can be brought into synchronization with the master.