Cabletron Systems Netlink FRX8000, User Manual

Page: 394 / 468

22-2 FRX8000 3. 0 User G uide, Rev 02
●
i
to initiate or
d
to discontinue the packet trace.
●
(Only if initiating)
Frequency
:
0–32767
(sec). (Entering
0
runs the trace once.)
Screen and printer confirm initiation or discontinuation of a packet trace. Press
[F3]
twice to return to the Tests Menu. (The printer may continue to print for a while,
because the report lines are being produced faster than the printer can print them.)
Measuring Packet Delay
This operation measures the time required for a packet to travel from a source node to
a destination node and back.
To initiate or discontinue a delay measurement, press
[E]
at the Tests Menu (or
[E], [E]
from the Main Menu). When prompted, enter:
●
Source Node ID
:
1–250
.
●
Destination Node ID
:
1–250
.
●
i
to initiate or
d
to discontinue the packet delay measurement.
●
(Only if initiating)
Packet Size
:
6–256
.
●
(Only if initiating)
Frequency
:
0–32767
(sec). (Entering
0
runs the
measurement once.)
Screen and printer messages confirm initiation of the procedure. A printer message
will also confirm discontinuation after the test is complete. (Completion will not be
confirmed on the screen.) Press
[F3]
twice to return to the Tests Menu. (The printer
may continue to print for a while, because the report lines are being produced faster
than the printer can print them.)