Cabletron Systems Netlink FRX8000, User Manual

Page: 72 / 468

6-12 FRX8000 3. 0 User G uide, Rev 02
Coding
is the line coding technique used to carry clock signals:
0
= AMI/ZCS (Alternate Mark Inversion with Zero Code Substitution)
1
= AMI/No ZCS (Alternate Mark Inversion with no Zero Code Substitution)
2
= B8ZS (Bipolar Eight Zero Code Substitution)
Framing
is the frame format:
0
= D4,
1
= ESF (Extended Superframe Format)
Line Service
specifies whether the LP will use all (Full) or some (Fractional) of the DS0 channels
on a T1 line:
0
= Full,
1
= Fractional
Line Build Out
is the distance from the LP to the external T1 device:
1
= 0-133 ft.
2
= 134-266 ft.
3
= 267-399 ft.
4
= 400-533 ft.
5
= 534-655 ft.
Unit Type
0
= Primary,
1
= Secondary
Clocking
is the clocking mode in which the LP runs:
0
= Master,
1
= Slave
N7000 E1 LP
The E1 LP is supported only in N7400 and N7500 286- and 386-based
nodes. (The 486 does not support these LP types.)
Press
[C]
at the Line Processor Configuration Menu (or
[A], [C], [C]
from the Main
Menu). When prompted, enter:
●
Node ID
(the node containing the LP):
1–250
. (Default is the “local” node).
●
LP ID
:
0–7
(default is
0
.), as determined by switch settings on the card. (See
N7000 user documentation if necessary.)
●
Any other requested information, noting the values in Table 5-5 . (Press
[Enter]
at a prompt to specify the default.)