Cabletron Systems Netlink FRX8000, User Manual

Page: 132 / 468

9-14 FRX8000 3. 0 User G uide, Rev 02
Configuring Subscriber IDs
This operation creates records for the called and calling addresses that will be used for
connecting to an LLC2 host, or in X.25 call setup if SNA is being transported over the
frame relay link via a logical X.25 port. To complete the connection, the software must
recognize where the call is coming from (calling address) and where it is going (called
address).
To configure a Subscriber ID, press
[A]
, then
[C]
at the Subscriber Configuration Menu
(or
[A], [F], [A], [C]
from the Main Menu). When prompted, enter a
Subscriber ID
, up to
15 digits, as described under “ Subscriber Addressing ” (on page 9-15). (The default is
an asterisk, a universal wildcard.) If this is an existing record, a screen similar to
Figure 9-4 will be displayed. If this is a new record, enter the remaining requested
information, noting the values in
Table 9-1 .
Figure 9-4 SVC Subscriber Record
[A], [F], [A], [C]
from Main Menu
The parameters displayed by pressing [1] or [2] are listed in Table 9-1 .
When Changes Take Effect
When you add a new Subscriber record, the change will be written to the database as
soon as you enter the final parameter value. When you modify a parameter in an
existing record, the change will be written to the database immediately.
The change will become effective as soon as the next call is placed. (The change will
not affect a call in progress.)
S ubs criber Maintenan ce
* Sub scriber ID 10000100001
A Sub scriber Name xsu b1
B Dialu p S ubs criber N
C Routing Algorithm 0 R ound R obin
D Systematic Redirection Y
E Redirect on Bus y N
F Redirect on Out of Ord er N
G Bandw . Allocation Group 1
1 Routing Path s
2 Redirection Ad dres ses
S elect