Cabletron Systems Netlink FRX8000, User Manual

Page: 186 / 468

12-10 FRX8000 3. 0 User G uide, Rev 02
Bandw. Alloc. Group
is a method of prioritizing outgoing traffic over trunks. Each IP and IPX network
interface, SVC Subscriber, and PVC is assigned to a bandwidth allocation group
defined by a
Percent of Bandwidth
value (
1–100
) and a
Priority
(
0–9
) specified in the
Network Defaults file. (See " Bandwidth Allocation Groups for Trunks " on page 4-8.)
When configuring priorities, be careful to consider the types of
traffic being routed on other connections in the node.
1st,2nd,etc. Routing Path
assigns ports to the subscriber's routing paths group.
1st,2nd,etc. Redirected Sub No.
is a subscriber that will be called according to the specified redirection option.
Configuring BSC Interactive Subscribers
The BSCI Subscriber file identifies each BSC HPAD and TPAD. Press
[G]
, then
[A]
,
then
[C]
from the Ports Selection Menu (or
[A], [D], [G], [A], [C]
from the Main Menu).
When prompted, enter:
●
Node ID
:
1–250
. (Default is the local node.)
●
LP ID
:
0–7
. (Default is
0
.)
●
BSC Port
:
0–7
. (Default is
0
.)
●
Connection ID
:
0–255
. This is an internal identifier that will link the subscriber
with a device configured in the BSC Interactive Devices file (described later in
this chapter).
●
Any other requested information, noting the values in Table 12-3 . (Press
[Enter]
at a prompt to specify the default value.)