Cabletron Systems Netlink FRX8000, User Manual

Page: 311 / 468

St atistics Displays 20-15
message text says
Outgoing
if this node is a point in the path of the
datagram, and
Incoming
if the datagram originated at this node.
Out/In Pkt Lost
is the number of datagrams transmitted by this node that subse-
quently were lost. The message text says
Outgoing
if this node is
a point in the path of the datagram, and
Incoming
if the datagram
originated at this node.
Out/In Redirect
is the number of datagrams transmitted by this node that subse-
quently were redirected within the same network. The message
text says
Outgoing
if this node is a point in the path of the dat-
agram, and
Incoming
if the datagram originated at this node.
Out Echo
is the number of requests to other entities in the IP network to
respond, as a means of confirming that communication is possible.
In Echo
is the number of requests from other entities in the IP network to
respond to those entities, as a means of confirming that communi-
cation is possible.
Out/In Time Exceed
is the number of transmitted datagrams that subsequently were
discarded by a router due to expiration of the datagram's “time to
live,” or by a destination host due to inability to reassemble the
datagram within the necessary time period. The message text says
Outgoing
if this node is a point in the path of the datagram, and
Incoming
if the datagram originated at this node.
Out/In Bad IP Hdr
is the number of transmitted datagrams that subsequently were
discarded due to a header size less than was specified. The
message text says
Outgoing
if this node is a point in the path of the
datagram, and
Incoming
if the datagram originated at this node.
Out Time Req
is the number of requests to other entities in the IP path for
timestamps, which are a method of determining delay character-
istics over the Internet.
In Time Req
is the number of requests received from other entities in the IP
path for timestamps, which are a method of determining delay
characteristics over the Internet.
Out Time Rsp
is the number of responses to timestamp requests that were made
to this node by other entities in the IP path.
In Time Rsp
is the number of responses received by this node to timestamp
requests.
Out Info Req
is the number of requests to other entities in the IP path for the IP
address of the network to which they are attached.
In Info Req
is the number of requests received from a host for the IP address
of the network to which this node is attached.
Out Info Rsp
is the number of responses sent by this node to information
requests.
In Info Rsp
is the number of responses received by this node to information
requests.
Out Mask Req
is the number of requests to other entities in the IP path for the
subnet mask of the IP network to which they are attached.