Cabletron Systems Netlink FRX8000, User Manual

Page: 41 / 468

Chapter 4
Configuring Network Parameters
Press
[A]
at the Configuration Menu to display the Network Selection Menu.
Figure 4-1 Network Network Selection Menu
[A],[A] from Main Menu
Files configured from this menu are:
●
Network Defaults (see page 4-2) – node and X.25 level-3 parameters that the
network needs for proper operation of FRX8000s.
●
Network Representation (see page 4-9) – allows creation of a graphic map of
your network.
●
Async PAD parameters (described in Chapter 13) – used to define the operation
of async devices connected to async PAD ports in FRX8000s.
●
IPX Filter Definitions (described in Chapter 15) – used to maximize efficiency
on a WAN network connected via an FRX8000 to a Novell Netware network.
Filters are applied to IPX traffic as defined by IPX Applications records.
●
Frame Relay Bandwidth Allocation (described on page 8-2) – optimizes frame
relay bandwidth use, ensuring that response time-sensitive traffic gets access to
the available bandwidth.
N etw ork S election Menu
A Configure N etw ork Defaults
B Configure N etw ork Representation
C Configure A sync PAD Profile
D Configure A sync PAD Login
E Configure A sync PAD Ban ner
F Configure I PX Filter Definition s
G Configure Frame Relay Band width Alloc.
R Return to Previous Men u
S elect: