Cabletron Systems Netlink FRX8000, User Manual

Page: 255 / 468

Introduction to Syst em Operation 17-3
D Create/Delete PVC On Line
– creates or deletes a temporary PVC. Described
in various chapters specific to protocols.
E File Transfer
– sends one or more files to a remote INM/NMP. Chapter 17 .
F Remote Control
– allows the operator at an INM or NMP to take control of any
other FRX8000 Switch on the same network. Chapter 17 .
G Update Network Defaults
– sends changes in the Network Defaults file to all
INMs/NMPs in the network. Chapter 4.
H Message Services
– allows the operator at an INM or NMP to place a call to,
or answer a call from, a subscriber device or another INM/NMP. Chapter 17 .
C Status Displays
– Chapter 19.
A Node Status
– displays performance and operational status for a node.
B Port Status
– displays performance and operational status for a port.
C Virtual Connections
– identifies current physical and logical connections on a
port; includes subscriber IDs, connection states.
D Line Monitor
– displays control and information data on packets passing
through a specified port.
E Trunk Status
– identifies all trunks on a specified node.
F Hot Node Status
– is not currently supported.
G IPX RIP Table Display
– displays the contents of the RIP table.
H IPX SAP Table Display
– displays the contents of the SAP table.
D Alarms
– Chapter 21 .
A Alarms Report
– produces a summary of alarms for the entire network, or
for a specified node, severity level, and/or time interval.
B Change Alarm Level to be Printed
– controls which severity levels of
alarms will be printed.
C Display Alarms on Console
– causes alarm messages to be sent to the
INM/NMP video device instead of the printer.
D Change Default Routin
g – allows temporarily changing the node(s)
specified in the Node record (Chapter 5) that receive alarms from a
particular node.
E Load Default Routing
– overwrites changes made with Change Default
Routing and restores the routing configured in the database.
E Tests
– Chapter 22 .
A PVC Data Looping
– is not currently supported.
B PVC Data Drop
– is not currently supported.
C PVC Message Generation
– is not currently supported.
D Packet Trace
– follows the path of a packet from a source node to a
destination node.
E Packet Delay Measurement
– measures the time it takea a packet to
travel from a source node to a destination node and back.
F Load Generation
– is not currently supported.
G Test X.25 Address Translation Templates
– is not currently supported.
H IP Ping Connectivity Test
– uses the Ping function to determine whether
an IP host is reachable.
F Statistics
– Chapter 20 .
A Configure Statistics Thresholds (Node/LP/Port)
– allows creation of a
threshold for a statistic that, when crossed, will cause a alarm to be
generated.
B Display Statistics (Node/LP/Port/FR
) – displays the supported statistics
for the specified component, showing current values, as well as the
highest values reached by each statistic since the node was last booted
or since maximum values were last cleared.