Omron CS1W-MC221 -, Operation Manual

Page: 627 / 705

600
System Parameters Appendix D
Zone Parameters
Address R/W Name Description Default
setting
Top: L + 1,
Bottom: L
MC221 MC421
X Y Z U
1194
(4500) 11AD
(4525) 11C6
(4550) 11DF
(4575) R/W Zone
specifica-
tion 0000
0000
(0)
1195
(4501) 11AE
(4526) 11C7
(4551) 11E0
(4576) R/W Zone 1
negative
direction
setting 0000
0000
(0)
1196
(4502) 11AF
(4527) 11C8
(4552) 11E1
(4577) R/W Zone 1
positive
direction
setting 0000
0000
(0)
1197
(4503) 11B0
(4528) 11C9
(4553) 11E2
(4578) R/W Zone 2
negative
direction
setting Sets the negative or positive direction range of
zone 2.
The data configurations, ranges, and units for the
negative and positive direction set values are the
same as those for zone 1. 0000
0000
(0)
1198
(4504) 11B1
(4529) 11CA
(4554) 11E3
(4579) R/W Zone 2
positive
direction
setting
0 0 0
L+1 L
X
15 0015 00
0
0 0 0 0 0 0 0
Bit 15
Zone 8
Zone 7
Zone 6
Zone 5
L
Zone 4
Zone 3
Zone 2
Zone 1
Valid timing
Valid timing
Sets timing for validating zone settings. X = 0: Vali-
dates a zone at the end of the origin search, X = 1:
Validates a zone whether or not the origin search is
completed.
Zone 1 to 8
Validates or invalidates zone 1 to zone 8 settings.
Bits 00 to 07 correspond to zones 1 to 8.
00 01 02 03 04 05 06 07
Sets the negative or positive direction range of
zone 1. The data is 32-bit signed binary data.
L+1: Leftmost 16 bits, L: Rightmost 16 bits
Range: FD9DA601 to 026259FF Hex
(
−
39999999 to 39999999)
This setting is referenced when a specified zone
is valid and it must satisfy the following condi-
tion.
Negative direction set value
≤
Positive direction
set value
The minimum setting unit is set to 2 (for 0.01),
the display unit is set to 0 (for mm) and the neg-
ative direction set value for zone 1 is 3.99 [mm]
(i.e., 399 x 0.01) if the data is 399.
L+1 L 15 00 15 00
Zone 1 negative direction setting
L+1 L 15 00 15 00
Zone 1 positive direction setting