manualshive.com logo in svg

Omron CS1W-MC221 -, Operation Manual

The Omron CS1W-MC221 is a versatile and high-performance module designed for precise motion control in industrial applications. With its reliable performance and advanced features, this product ensures optimum efficiency and accuracy. You can conveniently access the detailed datasheet and user manual for free download from our website.

Share
Download
background image

xi

About this Manual:

This manual describes the features, specifications, and operation of the CS1W-MC421/221 Motion
Control Unit and includes the sections described below.

Please read this manual and the other manuals related to the CS1W-MC421/221 Motion Control Unit
carefully and be sure you understand the information provided before attempting to install and operate
the Motion Control Unit.

Refer to 

1-12 Overview of Version 1 Upgrades

 for an outline of the new features added to the CS1W-

MC421-V1 and CS1W-MC221-V1. (“-V1” is omitted in this manual.)

Section 1 

explains the features and system configuration of the CS1W-MC421 and CS1W-MC221

Motion Control Units (MC Units), and outlines some of the differences with the features of the earlier
C200H-MC221 MC Unit.

Section 2 

describes the MC Unit components and provides the information required for installing the

MC Unit.

Section 3 

describes the data contained within the MC Unit.

Section 4 

describes the means used to store data of various types and explains how data is trans-

ferred between the MC Unit and the CPU Unit.

Section 5 

describes the ways in which data can be transferred between the CPU Unit and the MC

Unit, including using the IOWR/IORD instructions, using the PLC Interface Area, and using dedicated
bits/flags in memory.

Section 6 

explains the basic positioning operations executed by the MC Unit.

Section 7 

describes using the G language to program motion control in the MC Unit.

Section 8 

provides examples of G-language programming for the CS1W-MC421/221.

Section 9 

explains how to search for and establish the origin using either an incremental encoder or

an absolute encoder, and gives a general overview of absolute encoders.

Section 10 

describes the teaching function. This function can be used to teach new positions by mov-

ing to a given position and then reading the present position of each axis as position data.

Section 11 

explains how to get started using the MC Unit. It provides information on the MC Unit’s

startup procedures, system configuration, wiring, creating I/O tables, inputting MC programs, creating
ladder programs, transferring data, saving data, and conducting trial operation.

Section 12 

explains the troubleshooting procedures to be employed if problems should occur in MC

Unit operation.

Section 13 

explains the maintenance and inspection procedures that must be followed to keep the MC

Unit operating in optimum condition. It includes instructions on the proper procedure to follow when
replacing an MC Unit, and precautions to observe when replacing a Servomotor.

The 

Appendices

 provide MC Unit performance information, control bit/flag timing charts, MC program

coding sheet, sheets for recording system parameter settings, and position data coding sheet.

!WARNING

Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.

Summary of Contents for CS1W-MC221 -


































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CS1W-MC221 -

ABB FEPL-02 Ethernet POWERLINK Quick Installation And Start-Up Manual preview
FEPL-02 Ethernet POWERLINK
Brand: ABB Pages: 2
ABB FENA-01 Quick Installation And Start-Up Manual preview
FENA-01
Brand: ABB Pages: 2
ABB ACS355 series Quick Start Up Manual preview
ACS355 series
Brand: ABB Pages: 139
ABB ACH400 Series Retrofit Manual preview
ACH400 Series
Brand: ABB Pages: 28
ABB TZIDC-110 Operating Instructions Manual preview
TZIDC-110
Brand: ABB Pages: 59
Eaton SC300 Operation Handbook preview
SC300
Brand: Eaton Pages: 166
B&R Industries AP1000 User Manual preview
AP1000
Brand: B&R Industries Pages: 89
Danfoss vlt soft starter mcd 500 Operating Instruction preview
vlt soft starter mcd 500
Brand: Danfoss Pages: 95
Danfoss EKE 347 Installation Manual preview
EKE 347
Brand: Danfoss Pages: 12
Danfoss VLT 5000 Instruction Manual preview
VLT 5000
Brand: Danfoss Pages: 33
Danfoss VLT 6000 Installation Manual preview
VLT 6000
Brand: Danfoss Pages: 59
Danfoss EKC 361 User Manual preview
EKC 361
Brand: Danfoss Pages: 16
Danfoss VLT AQUA Drive FC 200 Operating Instructions Manual preview
VLT AQUA Drive FC 200
Brand: Danfoss Pages: 91
Danfoss EvoFlat WSS Installation Manual preview
EvoFlat WSS
Brand: Danfoss Pages: 2
Danfoss FC 300 Operating Instructions Manual preview
FC 300
Brand: Danfoss Pages: 100
Danfoss FC 300 Operating Instruction preview
FC 300
Brand: Danfoss Pages: 82
Danfoss Optyma Plus User Manual preview
Optyma Plus
Brand: Danfoss Pages: 18
Danfoss AMV 438 SU Installation Manual preview
AMV 438 SU
Brand: Danfoss Pages: 12

Brands by name

Popular brands

Load more brands