Omron CS1W-MC221 -, Operation Manual

Page: 532 / 705

505
System Configuration and Wiring Section 11-2
5) Creating Projects/Adding PLCs (CPU Units)
Note A simple explanation of the operation procedure is given below. For details,
refer to the
CX-Motion Online Help .
1,2,3... 1. Turn ON the power supply for the personal computer, start the CX-Motion
and select
File/New/Project .
2. The Project Properties Dialog Box will be displayed. The title can changed
and explanation can be omitted.
3. Click OK . The Add PLC Dialog Box will be displayed.
4. Input the desired PLC name.
5. Click the Down Arrow at the right of the Device Type Field, and select the
PLC model from the menu. For example, if the CPU Unit is the CS1G-
CPU45, select
CS1G .
6. Click the Settings button on the right of the Device Type Field. Click the
Down Arrow at the right of the CPU type field, and select the type of CPU
Unit from the menu. In this example, CPU45 is selected.
7. Click the OK button. The Add PLC Dialog Box will return.
8. Set the Network type. In this example. SYSMAC WAY is selected.
9. Click the Set button on the right of the Network Type Field, and click the
Driver Tab.
10. In Port Name under Connections, select the port of the personal computer
to which the cable is connected (COM1/COM2).
11. Click OK . The Add PLC Dialog Box will return.
12. Click OK . The PLC will be added to the project.
PC1