Omron CS1W-MC221 -, Operation Manual

Page: 517 / 705

490
Performing Teaching Section 10-3
Ladder Programming
Example The following example program transfers data with the MC Unit mounted to
the CS and the unit number set to 0. In this example, teaching address 64 hex
(100) of task 1 is set. It is assumed that both the IOWR operand and the data
transferred are normal.
When debugging, check the Error Flags from the ladder program.
Transfer Data (DM)
10-2-2 Using the Teaching Box
Press “TEACH” when performing teaching from the Teaching Box. The teach-
ing address can be changed by using the Numeric Keys to change the posi-
tion data address displayed in the lower-left corner of the screen. Refer to the
Teaching Box Operation Manual (W320) for details.
10-3 Performing Teaching
Teaching can be performed once the teaching address has been set. When
teaching is performed in the following example, the X-axis present position of
30 is stored in position data address A0100 and the Y-axis present position of
40 is stored in position data address A0101.
Execution condition
(Work Bit) W00001
Address (6114) to set the teaching address.
Specifies the first source word.
(Work Bit) W00003
(Work Bit) W00002
Set the following
teaching address in
D00200 and D00201.
Specifies destination unit number 0 and
two words to be transferred.
Teaching address: 100 (A0100)