manualshive.com logo in svg

Rohde & Schwarz ZNB20, User Manual

The Rohde & Schwarz ZNB20 User Manual is an essential companion for users of this cutting-edge product. Packed with comprehensive instructions and helpful insights, this manual is available for free download from manualshive.com. Unlock the full potential of your ZNB20 with this user-friendly and informative resource.

Share
Download
background image

Index

R&S

®

 ZNB/ZNBT

1305

User Manual 1173.9163.02 ─ 38

"Define Mixer Meas" dialog ............................................. 392
"Define Parallel Measurement" dialog ............................. 366

Add/delete DUTs manually (R&S ZNBT only) .......... 369
"Auto Setting" (R&S ZNBT only) ............................... 368
"Balanced Ports" tab ................................................. 370
Change  the  logical  VNA  port  numbering  (R&S  ZNBT
only) .......................................................................... 370
Define physical port connections (R&S ZNBT only) . 369
"DUT Definition" tab .................................................. 368
"Frequency Offset" tab .............................................. 371
"Minimum Offset" ...................................................... 372
Modify an existing DUT (R&S ZNBT only) ................ 369
"Parallel Measurement with Frequency Offset" ........ 372
"Reference Impedance" tab ...................................... 371
State indication popup .............................................. 372

"Define Physical Ports" dialog ......................................... 629
"Define Ripple Test " dialog ............................................ 525
"Define Segments" dialog ............................................... 248

"Displayed Columns" ................................................ 252

"Define User Color Scheme" dialog ................................ 569
Delay ............................................................................... 128

"Trigger" .................................................................... 403

Delay (Offset Embed) ..............................................412, 413
"Delete All Cal Kits" ......................................................... 607
"Delete All Mem" ............................................................. 493
"Delete Cal Pool" ............................................................. 607
"Delete Trace" ................................................................. 482
"Delta Mode" ................................................................... 533
Denominator ....................................................................447
"Destination" (memory trace) .......................................... 487
"Destination" (memory traces) ........................................ 493
Detector ...........................................................................119
Device address ............................................................... 646
Device Control .................................................................213
"Device LAN Configuration" dialog .................................. 633
Device message  .............................................................647
Device response  ............................................................ 647
Diagram .......................................................53, 76, 482, 560

"Active Diagram" ....................................................... 561
"Add Tr+Diag" ........................................................... 561
"Delete Diagram" ...................................................... 562
"Maximize" ................................................................ 562
Name ........................................................................ 562
"Overlay All" .............................................................. 563
programming examples  ......................................... 1211
"Show Title" ...............................................................562
"Title" .........................................................................562
"Trace List" ................................................................561

Dialog ................................................................................ 99
Dialogs .............................................................................. 52
Differential imbalance measurement ...............................462
Differential mode ..................................................... 120, 122
Direct Control Interface ............................................... 38, 41
Display .............................................................................. 29

Diagram .................................................................... 560

"Display Circle" ................................................................ 529
"Display" "Config" ............................................................ 567

"Channel Info" ........................................................... 568
"Color Scheme" .........................................................567
"Font Size" ................................................................ 569
"Hide Sensitive Information" ..................................... 568
"Info Table" ............................................................... 569
"Trace Info" ............................................................... 568

Display elements ............................................................... 87
"Display" softtool ............................................................. 560

"Config" tab ............................................................... 567
"Diagram" tab ............................................................ 560

"Split" tab .................................................................. 564
"Touchscreen" tab (R&S ZNB only) .......................... 573
"View Bar" tab ........................................................... 572

"Displayed Columns" dialog ............................................ 252
"Distance Center" ............................................................ 434
"Distance Span" .............................................................. 434
"Distance Start" ............................................................... 434
"Distance Stop" ............................................................... 434
Documentation map .......................................................... 13
Dolph-Chebyshev

"Side Lobe Level" ......................................................495

DOWN  ............................................................................ 651
Drag and drop ................................................................... 56
Driver (remote control) .................................................... 641
"Driving Mode"

"Alternated" ............................................................... 373
"Auto" ........................................................................ 373
"Chopped" ................................................................. 373

E

Electrical Length ..............................................128, 412, 413
Electrostatic discharge (ESD) ..................................... 37, 39
"Embedding"

"Balanced" ................................................................ 409
"Differential Match" ........................................... 410, 411
"Ground Loop" .................................................. 409, 410
"Impedance Renormalization" ...................................410
"Port Sets" .........................................................407, 408
"Single Ended" .......................................................... 407

EMI suppression ............................................................... 17
ENABle ....................................................................661, 662
EOI ................................................................................ 1255
Error Log ......................................................................... 616
Error message ...............................................................1245
Error queue ............................................................. 661, 673
Errors ............................................................................ 1245

Asynchronous ......................................................... 1246
During firmware update .......................................... 1247
During measurement .............................................. 1246
FPGA update .......................................................... 1247

ESB ................................................................................. 665
ESE ......................................................................... 661, 666
ESR ................................................................................. 666
Evaluation of data ............................................................. 71
"Evaluation Range" Dialog .............................................. 504
EVENt register ................................................................ 662
Execution (command)

overlapping  .............................................................. 657
sequential  ................................................................ 657

Export

Sweep segments ...................................................... 251

"Export Data - <File Type>" dialog .................................. 510

"Ask Before Overwriting" ...........................................511
"Contents" ................................................................. 511
"Output Format" ........................................................ 511

"Export Data - ASCII Files" dialog

"Add Ref Impedances" .............................................. 511
"Decimal Separator" ..................................................512
"Field Separator" ....................................................... 512
"Formatted Values" ................................................... 512

"Export Data - MatLab Files" dialog

"Add Ref Impedances" .............................................. 511
"Field Separator" ....................................................... 512
"Formatted Values" ................................................... 512

"Export Data - Touchstone Files" dialog

"Normalize with Port-Specific Impedances" .............. 511

Summary of Contents for ZNB20





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZNB20

ABB SM1000 Installation Instructions Manual preview
SM1000
Brand: ABB Pages: 8
Van Walt KISS Quick Start Manual preview
KISS
Brand: Van Walt Pages: 6
zebris PDM Specification And Operating Instructions preview
PDM
Brand: zebris Pages: 42
Make Noise PHONOGENE Owner'S Manual preview
PHONOGENE
Brand: Make Noise Pages: 15
Major tech MT785 Instruction Manual preview
MT785
Brand: Major tech Pages: 40
VEE GEE BX-3 Operation Manual preview
BX-3
Brand: VEE GEE Pages: 2
X-Rite RM200QC User Manual preview
RM200QC
Brand: X-Rite Pages: 45
X-Rite i1Pro Quick Start Manual preview
i1Pro
Brand: X-Rite Pages: 22
G-Tek 62 Series Operating Manual preview
62 Series
Brand: G-Tek Pages: 83
Yamaha AW4416 Manual Supplement preview
AW4416
Brand: Yamaha Pages: 48
ILX Lightwave OMM-6810B User Manual preview
OMM-6810B
Brand: ILX Lightwave Pages: 126
Kawai Digital Piano CA440 Owner'S Manual preview
Digital Piano CA440
Brand: Kawai Pages: 48
Isspro R5441 Manual preview
R5441
Brand: Isspro Pages: 2
aboni HydroTracer FLV HT2 Operation Manual preview
HydroTracer FLV HT2
Brand: aboni Pages: 48
ASD A100800 User Manual preview
A100800
Brand: ASD Pages: 72
NARDA 8059-00 Quick Step Manual preview
8059-00
Brand: NARDA Pages: 60
F&F LE-05d Quick Start Manual preview
LE-05d
Brand: F&F Pages: 8
FLIR ME13552 User Manual preview
ME13552
Brand: FLIR Pages: 21

Brands by name

Popular brands

Load more brands