Rohde & Schwarz ZNB20, User Manual

Page: 1008 / 1332

Command Reference
R&S
®
ZNB/ZNBT
993 User Manual 1173.9163.02 ─ 38
Setting parameters:
<CalType> FNPort | FOPort | OPTPort | FRTRans | FTRans | RTRans |
UTRans | REFL | RSHort | PFNPort
FNPort
–
full n-port (UOSM) calibration
FOPort
–
full one-port ("Refl OSM") calibration
SFTPort
–
separate full two-port calibrations
OPTPort
–
one path two ports calibration
PFNPort
–
full n-port (UOSM) calibration for SMARTerCal
<Characterization> Location of the characterization (cal kit file) to be used for the
automatic calibration (string parameter):
–
The empty string (
' '
) refers to the factory calibration of (and
stored on) the active calibration unit.
–
A VNA cal kit file name
*.calkit
without path refers to a
specific cal kit file stored in the internal memory of the active cal-
ibration unit.
–
A VNA cal kit file name without path but prefixed with "SD:"
refers to a specific cal kit file stored on the SD card inserted at
the active calibration unit.
–
A VNA cal kit file name
*.calkit
with path refers to a spe-
cific cal kit file stored in an arbitrary directory on the analyzer.
<TestPort1> Test port numbers. For an n-port automatic calibration, n arbi-
trary (not necessarily consecutive) port numbers must be speci-
fied. For a one path two port calibration (OPTPort), the first port
no. denotes the node port (fully calibrated port).
<TestPort2> Second test port number of the analyzer
Example: CORR:COLL:AUTO:TYPE FNPort, '', 1, 2, 4
Perform an automatic full 3-port calibration at test ports 1, 2,
and 4 using the calibration unit's default calibration kit file and
arbitrary test ports of the cal unit.
Usage: Setting only
Manual operation: See "Calibration Type / Source" on page 263
[SENSe<Ch>:]CORRection:COLLect:CKIT:INSTall <CalKitFile>, <Gender>[,
<Ports>, <Ports>...]
Allows to load cal kit data by gender
●
from the given file
●
to the given ports or all ports
Use
MMEMory:CKIT:INFO?
on page 918 to get information about cal kit files.
Suffix:
<Ch>
.
Channel number
Setting parameters:
<CalKitFile> Path to the cal kit file, either absolute or relative to the current
directory (see
MMEMory:CDIRectory
)
SCPI Command Reference