Rohde & Schwarz ZNB20, User Manual

Page: 496 / 1332

GUI Reference
R&S
®
ZNB/ZNBT
481 User Manual 1173.9163.02 ─ 38
In remote control each channel can contain an active trace. The active remote traces
and the active manual trace are independent of each other; see
Chapter 6.3.2, "Active
Traces in Remote Control" , on page 654.
5.12.1.1 Controls on the Traces Tab
The "Trace Manager..." button opens the Trace Manager Dialog
Active Trace
Selects an arbitrary trace of the active recall set as the active trace in its channel and
diagram. At the same time it sets the trace's diagram and channel as the active
Dia-
gram / Channel .
Tip: You can also select an item in a trace list or a trace line in a diagram to achieve
this.
This function is disabled if only one trace is defined.
Add Trace
Creates a new trace in the active Diagram / Channel and makes it the Active Trace .
The new trace is created with the settings of the former active trace, but displayed in
another color. The former and the new active trace overlay each other, but can be
easily separated, e.g. by changing the reference position or by selecting a different
measurement for the new trace (see
Chapter 5.9, "Meas Softtool" , on page 435).
The new trace is named Trc<n>, where <n> is the largest of all existing trace numbers
plus one. The name can be changed in the
Trace Manager Dialog .
Tip: To create a new trace in a new channel, use "Add Ch+Trace" in the Channel Con-
fig > "Channels" softtool tab (see Chapter 5.5.1, "Channels Tab" , on page 344).
Trace Config Softtool