manualshive.com logo in svg

Rohde & Schwarz ZNB20, User Manual

Share
Download
Rohde & Schwarz ZNB20 User Manual Download Page 1208

Command Reference

R&S

®

 ZNB/ZNBT

1193

User Manual 1173.9163.02 ─ 38

Parameters:

<Format>

FDATa | SDATa | MDATa
See list of parameters below. The unit is the default unit of the
measured parameter; see 

CALCulate<Ch>:PARameter:

SDEFine

.

Range: 

Depending on the measured parameter and format.

*RST: 

SDATa

Example: 

See 

TRACe[:DATA][:RESPonse][:ALL]?

The following parameters are related to trace data:

FDATa

Formatted trace data, according to the selected trace format (

CALCulate<Chn>:

FORMat

). 1 value per trace point for Cartesian diagrams, 2 values for polar dia-

grams.

SDATa

Unformatted trace data: Real and imaginary part of each measurement point. 2
values per trace point irrespective of the selected trace format. The trace mathe-
matics is not taken into account.

MDATa

Unformatted trace data (see 

SDATa

) after evaluation of the trace mathematics.

INPut<PhyPt>:ATTenuation 

<Attenuation>

Sets the attenuation for the received waves. This command is available if at least one
of the 

Receiver Step Attenuators

 is installed.

For redefined physical ports (see 

[SENSe:]UDSParams<Pt>:PARam

), the respective

measurement receiver (b-wave) is significant. E.g. if a receover step attenuator is
installed for physical port 1, then an attenuation factor can be applied to the (redefined)
port receiving b1.

Note

:

●

INPut<PhyPt>:ATTenuation

 is not channel-specific; the value is valid for 

all

channels

. Use 

[SENSe<Ch>:]POWer:ATTenuation

 to set or query a channel-

specific attenuation value.

●

In presence of 

External Switch Matrices

 all VNA ports have to be equipped with

receiver step attenuator option.

Suffix: 

<PhyPt>

.

Physical port number; if unspecified the numeric suffix is set to 1

Parameters:

<Attenuation>

Attenuation factor for the received wave.
Range: 

0 dB, 10 dB, 20 dB, 30 dB. UP and DOWN incre-
ment/decrement the attenuation in 10 dB steps.
The analyzer rounds any entered value below the
maximum attenuation to the closest step.

*RST: 

0 dB

Default unit: dB

R&S ZVR/ZVAB Compatible Commands

Summary of Contents for ZNB20





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands