GUI Reference
R&S
®
ZNB/ZNBT
570
User Manual 1173.9163.02 ─ 38
Element
Selects the screen element to be modified. The list contains the background and all
traces, text elements and lines in the diagrams.
Remote command:
The
<DispEl>
suffix in the
DISPlay:CMAP<DispEl>...
commands identifies the
screen element. See
Properties
Configures the selected screen element.
●
"Color" opens a standard color dialog where you can assign a color to the selected
element.
●
"Trace Line Style" and "Trace Line Width" are enabled if the selected element is a
trace.
Remote command:
DISPlay:CMAP<DispEl>:RGB
DISPlay:CMAP:TRACe:RGB
Limit Test > Show Limit Fail Symbols
Displays or hides the colored squares on the trace indicating failed measurement
points. Hide the squares if they cover too much of the trace. Instead of using the limit
fail symbols, you can colorize the trace to highlight failed trace sections.
Remote command:
DISPlay:CMAP:LIMit:FSYMbol[:STATe]
Limit Test > Colorize Trace when Failed
Assigns a different trace color to failed trace segments. The different color reaches
from the last passed measurement point before the start of the failed segment to the
last failed measurement point in the segment. This means that the beginning of the
colorized trace is possibly outside the failed range.
The example below shows a lower limit line at
–
10 dB. Due to the rule described
above, a marker placed on the colorized ("failed") trace point at 5.004050 GHz stil indi-
cates a response value within the allowed range (
–
9.7222 dB >
–
10 dB).
Remote command:
DISPlay:CMAP:LIMit:FCOLorize[:STATe]
Limit Test > Use Trc Color for Limit Lines
Assigns the trace color to all limit line segments associated with the trace. All other
limit line color definitions are ignored.
Display Softtool
