GUI Reference
R&S
®
ZNB/ZNBT
537
User Manual 1173.9163.02 ─ 38
The analyzer uses a simple ASCII format to export marker values. By default, the
marker file extension is
*.txt
. The file contains all traces in the active recall set
together with their names and measured quantities. Below each trace, the file shows a
list of all markers with their names, stimulus and response values.
The following example of a marker file describes a recall set with two traces, "Trc1"
and its memory trace "Mem2[Trc1]". "Trc1" has a reference marker "R" and three nor-
mal markers "M1, M2, M3" assigned, the memory trace has no markers.
Remote command:
Decimal Places...
Opens the "User Interface" tab of the "System Config" dialog, which allows to define
the (maximum) number of decimal digits for different units. See
5.14.3 Marker Search Tab
These "Marker Search" functions moves the active marker to a (local) maximum or
minimum of the active trace.
The search operation can be restricted to a configurable range of stimulus values
("Search Range..."). By default, the search range is equal to the entire sweep range.
If necessary, the active marker is enabled to indicate the search result.
Background information
Refer to
"Basic Marker Search Functions"
Marker Softtool
