Command Reference
R&S
®
ZNB/ZNBT
931
User Manual 1173.9163.02 ─ 38
Example:
Assume that the current setup contains two traces named Trc1
and Trc2, respectively, and that ripple limits have been defined
for Trc1.
MMEM:STOR:RIPP 'TRC1', 'C:
\Users\Public\Documents
\Rohde-Schwarz\Vna\LIMitLines\Lim_Trc1.limit'
Store the ripple limit definition of Trc1 to a ripple limit file.
MMEM:LOAD:RIPP 'TRC2', 'C:
\Users\Public\Documents
Rohde-Schwarz\Vna\LIMitLines\Lim_Trc1.limit'
Load the previously created ripple limit file and assign the limits
to Trc2.
CALC:RIPP:DISPlay ON
Show the ripple limit line for the active trace in the diagram.
Usage:
Setting only
Manual operation:
See
"Recall / Save Ripple Test..."
MMEMory:LOAD:SEGMent
<Channel>, <SweepSegFile>
Replaces the related channel's current sweep segment definition by a sweep segment
definition loaded from the specified ASCII file.
Setting parameters:
<Channel>
Channel number
<SweepSegFile>
String parameter to specify the name and directory of the sweep
segment file to be loaded. The default extension (manual con-
trol) for sweep segment files is
*.SegList
, although other
extensions are allowed.
If no path is specified the analyzer searches the current direc-
tory, to be queried with
Example:
Assume that the current recall set contains two channels num-
bered 1 and 2, respectively, and that sweep segments have
been defined for channel no. 1.
MMEM:STOR:SEGM 1, 'C:\Users\Public\Documents\
Rohde-Schwarz\Vna\SweepSegments\Seg_Ch1.SegList'
Store the sweep segment definition of channel 1 to a sweep
segment file.
MMEM:LOAD:SEGM 2, 'C:\Users\Public\Documents\
Rohde-Schwarz\Vna\SweepSegments\Seg_Ch1.SegList'
Load the previously created sweep segment file and use the
sweep segments for channel 2.
Usage:
Setting only
Manual operation:
See
SCPI Command Reference
