Command Reference
R&S
®
ZNB/ZNBT
906
User Manual 1173.9163.02 ─ 38
Example:
HCOP:ITEM:ALL
Select the complete information to be printed.
HCOP:ITEM:TIME ON; :HCOP
Include the data and time in the printed output and start printing .
HCOPy:PAGE:COLor
<Boolean>
Enables color printing.
Parameters:
<Boolean>
ON
–
print with color or grayscale (depending on the printer
capabilities).
OFF
–
use black-and-white printing using line styles to allow
identification of different traces.
*RST:
n/a (*RST does not affect the printer configuration)
Example:
HCOP:PAGE:COL OFF
Be thrifty; generate black-and-white hardcopies.
HCOPy:PAGE:MARGin:BOTTom
<LowMargin>
Defines the distance between the bottom of the page and the bottom of the printed
information.
Parameters:
<LowMargin>
Lower margin
Range:
0.01 mm to 10000 mm
*RST:
n/a (*RST does not affect the printer configuration)
Example:
HCOP:PAGE:MARG:BOTT 10; TOP 10
Set an upper and a lower margin of 1 cm.
HCOPy:PAGE:MARGin:LEFT
<LeftMargin>
Defines the distance between the left edge of the page and the left edge of the printed
information.
Parameters:
<LeftMargin>
Left margin
Range:
0.01 mm to 10000 mm
*RST:
n/a (*RST does not affect the printer configuration)
Example:
HCOP:PAGE:MARG:LEFT 10; RIGHT 10
Set an left and a right margin of 1 cm.
HCOPy:PAGE:MARGin:RIGHt
<RightMargin>
Defines the distance between the right edge of the page and the right edge of the prin-
ted information.
SCPI Command Reference
