manualshive.com logo in svg

Rohde & Schwarz ZNB20, User Manual

Share
Download
Rohde & Schwarz ZNB20 User Manual Download Page 772

Command Reference

R&S

®

 ZNB/ZNBT

757

User Manual 1173.9163.02 ─ 38

Parameters:

<Mode>

NORMal | FIXed | ARBitrary

NORMal:

 If tracking is enabled (

CALCulate<Chn>:

MARKer<Mk>:SEARch:TRACking

 ON), the marker's stimulus

value 

CALCulate<Chn>:MARKer<Mk>:X

?

 is updated automat-

ically with every sweep, otherwise it is fixed. The marker position

CALCulate<Chn>:MARKer<Mk>:Y

?

 is adjusted to the corre-

sponding response value, i.e. the marker is always positioned on
the trace.
The marker's stimulus value can be set using

CALCulate<Chn>:MARKer<Mk>:X

; the marker automatically

follows the trace.

FIXed:

 freezes the marker at the position determined by the cur-

rent stimulus and response value. The response value stored
with the marker is not adjusted to subsequent sweeps. Tracking
is disabled. Stimulus and response value are stored with the
marker; they are not adjusted to subsequent sweeps and trace
format changes.
The marker stimulus can be set using

CALCulate<Chn>:MARKer<Mk>:X

, but the response value

remains fixed.

ARBitrary:

 freezes the marker at the position determined by the

current stimulus and response value. Tracking is disabled. The
marker stores the stimulus value and – in addition – its X and Y
coordinates in the current marker format (see

CALCulate<Chn>:MARKer<Mk>:FORMat

).

The marker position can be set using

CALCulate<Chn>:MARKer<Mk>:X

 and

CALCulate<Chn>:MARKer<Mk>:Y

. If, in the current trace for-

mat, the X axis represents the stimulus, the marker's stimulus
value is adjusted accordingly. Otherwise the marker's stimulus
value remains unchanged. Switching between trace formats
resets the marker position to the response value at the marker's
stimulus value.
*RST: 

NORMal

Example: 

CALC:MARK ON; :CALC:MARK:TYPE FIX

Create marker 1 and display it in the center of the sweep range
as a fixed marker.

CALC:MARK:X 1GHz

Shift the marker horizontally. The response value remains fixed.

Manual operation: 

See 

"Marker Mode"

 

on page 536

SCPI Command Reference

Summary of Contents for ZNB20





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands