GUI Reference
R&S
®
ZNB/ZNBT
554
User Manual 1173.9163.02 ─ 38
Recent Files
The buttons are labelled with the last recall sets which were stored in the current or in
previous sessions. They open the corresponding recall set.
5.15.1.2
Setup Recall Switch Matrix Configuration Dialog
When opening an existing recall set file it may be necessary to adapt the current sys-
tem configuration to the switch matrix configuration of the recall set. The "Recall Switch
Matrix Configuration" dialog guides you through this process.
In the dialog proceed as follows:
1.
Reassign Matrices:
For each "Matrix in Recall Set", select a switch matrix of the
same (driver) type as "Assigned Matrix".
If no switch matrix of the same type exists, tap "Switch Matrix" to open the
that allows you to register/configure additional switch matrices.
2.
Restore RF connections:
The recall set's switch matrix configuration comprises
the RF connections of the related switch matrices. This RF connection configura-
tion will be loaded with the recall set, requiring you to adapt the physical RF con-
nections accordingly.
File Softtool
