GUI Reference
R&S
®
ZNB/ZNBT
465
User Manual 1173.9163.02 ─ 38
The standard test setup for a "Power Sensor" measurement involves one analyzer
source port and a power sensor. The power sensor is connected e.g. to the analyzer's
USB port and provides the (scalar) wave quantity results. See
Power Meter
Shows a list of all power meters that have been properly configured. See
The bordered label below displays the type and serial number of the selected power
meter.
Remote command:
CALCulate<Ch>:PARameter:MEASure
'TraceName', 'PmtrD1 | ...
CALCulate<Ch>:PARameter:SDEFine
'TraceName', 'PmtrD1 | ...
Auto Zero
Initiates an automatic zeroing procedure of the power meter which must be disconnec-
ted from the RF power; see
on page 223. A message indicates that zeroing
is finished.
Remote command:
SYSTem:COMMunicate:RDEVice:PMETer<Pmtr>:AZERo
Source Port
Selects one of the available test ports of the analyzer as a source of the stimulus sig-
nal.
Remote command:
CALCulate<Ch>:PARameter:MEASure
'TraceName', 'PmtrD1 | ...
CALCulate<Ch>:PARameter:SDEFine
'TraceName', 'PmtrD1 | ...
Meas Softtool