manualshive.com logo in svg

Rohde & Schwarz ZNB20, User Manual

Share
Download
Rohde & Schwarz ZNB20 User Manual Download Page 1264

Error Messages and Troubleshooting

R&S

®

 ZNB/ZNBT

1249

User Manual 1173.9163.02 ─ 38

●

Error Log:

 The error log ("Info > Error Log") contains a chronological record of

errors.

●

Exception Dumps:

 In case of an exception the R&S

 

ZNB/ZNBT automatically

generates a dump file for debugging purposes.
The level of detail of the dumps can be set from the 

Advanced Tab

 tab of the "Sys-

tem Config" dialog.
The latest 5 exception dumps can be retrieved using the "Save Report" function of
the "Info" dialog.

●

Save Report:

 The system report command ("Info > Save Report") collects the

setup, option, and hardware information as well as the error log and the current
selftest results and writes everything to a *.zip file. The *.zip file also contains the
current eeprom data and a screenshot of the VNA display. It is written to the report
directory 

C:\Users\Public\Documents\Vna\Report

. The file name contains

the current date and time, e.g. 

report_20110125_1658.zip

. "Save Report"

provides the most comprehensive information, comprising all other "Info" files.

See also 

"Save... / Print... / Save Report"

 

on page 614.

Obtaining Technical Support

Summary of Contents for ZNB20





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands