GUI Reference
R&S
®
ZNB/ZNBT
407
User Manual 1173.9163.02 ─ 38
Reset Offsets
The "Reset Offsets" button resets the length and loss parameters for all ports to their
default values.
Remote command:
[SENSe<Ch>:]CORRection:OFFSet<PhyPt>[:STATe]
5.7.1.3
Single Ended Panel
Allows to activate or deactivate single ended deembedding/embedding for selected
physical ports. For the "2-Port Data" network type it is also possible to change the
underlying Touchstone s2p file from the dock widget.
Access:
> "Single Ended"
The "Single Ended" panel can also be activated by selecting the
softtool tab. Refer to its description for background information, parameters and addi-
tional remote commands.
Active
The checkbox in the "Active" column activates or deactivates the selected "Single
Ended" de-/embedding
(i.e. adds or removes it to/from the calculation flow)
without changing its parameters.
Remote command:
CALCulate<Ch>:TRANsform:VNETworks:SENDed:DEEMbedding<PhyPt>[:
STATe]
CALCulate<Ch>:TRANsform:VNETworks:SENDed:EMBedding<PhyPt>[:
STATe]
5.7.1.4
Port Sets Panel
Allows to define the "Port Sets" to whom a deembedding or embedding network shall
be assigned ("Add","Delete").
Access:
> "Port Sets"
If the selected
is defined using one or more touchstone files, these files can
be selected from the dock widget ("...").
Offset Embed Softtool
