GUI Reference
R&S
®
ZNB/ZNBT
405
User Manual 1173.9163.02 ─ 38
Remote command:
TRIGger<Ch>[:SEQuence]:MULTiple:SOURce
TRIGger<Ch>[:SEQuence]:MULTiple:SLOPe<Num>
TRIGger<Ch>[:SEQuence]:MULTiple:HOLDoff
5.6.2 Sweep Control Tab
Replicates the "Sweep Control" tab of the "Sweep" softtool; see
5.7 Offset Embed Softtool
The "Offset Embed" softtool allows to define a length offset and loss for each test port,
compensating for the known length and loss of (non-dispersive and perfectly matched)
transmission lines between the calibrated reference plane and the DUT. It also con-
tains advanced functions for deembedding/embedding the DUT from/into more general
physical/virtual (matching) networks placed between the calibrated reference plane
and the DUT.
Access:
CHANNEL – OFFSET EMBED hardkey
Background information
Refer to
Chapter 4.6, "Offset Parameters and Embedding"
5.7.1 Offset Embed Dock Widget
On activating a tab in the "Offset Embed" softtool, a dock widget is displayed beneath
the trace area, whose content pane is synchronized with the selected softtool tab.
Access:
CHANNEL – OFFSET EMBED hardkey
5.7.1.1
Overview Panel
Shows an overview of the overall calculation flow and provides quick access to the
"Offset Embed" functions.
Offset Embed Softtool
