manualshive.com logo in svg

Rohde & Schwarz ZNB20, User Manual

Share
Download
Rohde & Schwarz ZNB20 User Manual Download Page 1266

Annexes

R&S

®

 ZNB/ZNBT

1251

User Manual 1173.9163.02 ─ 38

To switch from one user account to the other, use Windows ""Logoff" and "Logon". On
the R&S

 

ZNB/ZNBT the "Switch User" functionality is disabled.

10.1.2 Firmware Update

Upgrade versions of the analyzer firmware are supplied as single setup files *.msi.

Administrator account

You need administrator rights to install a new firmware version. See note on 

"User

accounts and password protection"

 

on page 1250 for details.

To perform a firmware update,

1. Copy the setup file to any storage medium accessible from the analyzer. This may

be the internal hard disk, an external storage medium (USB memory stick, external
CD-ROM drive) or a network connection (LAN, GPIB bus).

2. In the Windows

®

 Explorer, tap the setup file twice (or double-click with a mouse)

and follow the instructions of the setup wizard.

Setup files can be stored and installed again. The default drive name of the internal
hard disk is C:. External storage devices are automatically mapped to the next free
drive, i.e. D:, E: etc.

Factory calibration

A firmware update does not affect the factory calibration.

External accessories

Calibration units must be disconnected during a firmware update.

10.2 Interfaces and Connectors

This chapter provides a detailed description of the rear panel connectors of the
R&S

 

ZNB/ZNBT. An overview of the available front and rear panel is given in the Get-

ting Started guide (see 

Chapter 3.2, "Instrument Tour"

, 

on page 28).

 

 

Interfaces and Connectors

Summary of Contents for ZNB20





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands