Rohde & Schwarz ZNB20, User Manual

Page: 830 / 1332

Command Reference
R&S
®
ZNB/ZNBT
815 User Manual 1173.9163.02 ─ 38
Parameters:
<CircuitModel> SHLC
Currently only the "Shunt L, Shunt C" lumped element model is
supported
<Capacitance> Range: -1mF to 1 mF.
Increment: 1 fF (1E-15 F)
*RST:
1 pF (1E-12 F)
Default unit: F
Manual operation: See "Network" on page 428
CALCulate<Ch>:TRANsform:VNETworks:DIFFerential:EMBedding<LogPt>:
PARameters:DATA <Interchange>, <arg1>
Defines an differential match embedding network for a balanced port based on the
given S-Parameter traces.
The FIMPort circuit model requires S-Parameter traces of a single 2- port network.
Use
CALCulate<Ch>:TRANsform:VNETworks:DIFFerential:
EMBedding<LogPt>:TNDefinition FIMPort
to select the file import model before
executing this command.
Suffix:
<Ch>
.
Channel number
<LogPt> Logical port number
Setting parameters:
<Interchange> FPORts | IPORts
FPORts (default): the port numbers are not interchanged
IPORts : interchange port numbers of loaded
*.s2p
file.
<arg1> <block_data>
Content of a two-port Touchstone file (
*.s2p
) in IEEE488.2
Block Data Format .
Usage: Setting only
Manual operation: See "Select File..." on page 429
CALCulate<Ch>:TRANsform:VNETworks:DIFFerential:EMBedding<LogPt>:
PARameters:G<Cmp> <CircuitModel>[, <Conductance>]
Specifies the conductance value G in the "Shunt L, Shunt C" lumped element model
for differential match embedding.
In the query form, the <Conductance> parameter must be omitted.
Suffix:
<Ch>
.
Channel number
<LogPt> Logical port number (balanced port)
SCPI Command Reference