Rohde & Schwarz ZNB20, User Manual

Page: 765 / 1332

Command Reference
R&S
®
ZNB/ZNBT
750 User Manual 1173.9163.02 ─ 38
Example: *RST; :CALC:MARK ON
Create marker 1 in the center of the current sweep range and
assign it to trace no. 1.
CALC:MARK:FUNC:STAR
Divide the sweep range in half, starting at the current marker
position. As an alternative:
CALC:MARK:FUNC:STOP
Divide the sweep range in half, ending at the current marker
position.
Usage: Event
Manual operation: See "Center = Marker / Start = Marker / Stop = Marker / Span =
Marker" on page 549
CALCulate<Chn>:MARKer<Mk>:MODE <Mode>
Sets marker no.
<Mk>
to continuous or discrete mode. The marker doesn't have to be
created before (
CALCulate<Chn>:MARKer<Mk>[:STATe] ON
), the mode can be
assigned in advance.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk> Marker number in the range 1 to 10.
Parameters:
<Mode> CONTinuous | DISCrete
CONTinuous - marker can be positioned on any point of the
trace, and its response values are obtained by interpolation.
DISCrete - marker can be set to discrete sweep points only.
*RST:
CONT
Example: Suppose that the active recall set contains an active trace no. 1.
CALC:MARK:MODE DISC; :CALC:MARK2:MODE CONT
Create marker 1 in discrete mode and marker 2 in continuous
mode.
CALC:MARK ON; MARK2 ON
Display the two markers. Due to the different modes the horizon-
tal positions can be different.
Manual operation: See "Discrete" on page 535
CALCulate<Chn>:MARKer<Mk>:NAME <MarkerName>
Defines a name for marker no.
<Mk>
. The marker doesn't have to be created before
(
CALCulate<Chn>:MARKer<Mk>[:STATe] ON
), the name can be assigned in
advance.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk> Marker number in the range 1 to 10.
SCPI Command Reference